For Sale - sell your items here for free.

echo echoooo geckoooooo

nice usb mate, if it was a sandman then id be bidding

Have 2 x 15 X 295 ( 12" ) X 50 series low profile BF Goodrich Radial TA's
These tyres were put on the Corvette & on the road 1 time & were too wide so had to be removed
They are perfect condition & are going cheap at $300.00 for both
will upload a photo later today.
contact me if your interested.

Monk wrote:Have 2 x 15 X 295 ( 12" ) X 50 series low profile BF Goodrich Radial TA's
These tyres were put on the Corvette & on the road 1 time & were too wide so had to be removed
They are perfect condition & are going cheap at $300.00 for both
will upload a photo later today.
contact me if your interested.

Hey Monk, I'm up for rego soon and I doubt mine ones will pass. You may have just saved me a nock back on rego. Any idea what these will cost to post to 2480. NSW, QLD border.

Tweaker wrote:

Monk wrote:Have 2 x 15 X 295 ( 12" ) X 50 series low profile BF Goodrich Radial TA's
These tyres were put on the Corvette & on the road 1 time & were too wide so had to be removed
They are perfect condition & are going cheap at $300.00 for both
will upload a photo later today.
contact me if your interested.

Hey Monk, I'm up for rego soon and I doubt mine ones will pass. You may have just saved me a nock back on rego. Any idea what these will cost to post to 2480. NSW, QLD border.

Will find out for you Tweaker & let you know. most likely have to be sent via courier cause they are big tyres & would be cheaper than Australia Post

CURSED wrote:echo echoooo geckoooooo

nice usb mate, if it was a sandman then id be bidding

so if anybody knows of any little Holden vans that would be about the right size let me know. i can really only find carlectables and trax 1:43 scale which are cool, though a little impractical for this mod, not to mention pricey for the purpose.
matchbox made some FJs years back though generally because of the sedan bonnet, i doubt the Mod would be possible. i would love to find some HQ-Z vans somewhere around the 1:64 mark.

I do have a dairy delivery which is yet to receive a paintjob so if it seems more like you and i'll be happy to customise it for you. i wasn't happy with the damage to the original paint (below) so its pretty much a blank canvas for colour, detail etc.


for the Fordies amongst y'all there's a 97 Transit on "blocks" ATM (shown here before i used it for work and is now ready for paint also)


as long as i cover the expense of the bits i use and they go to people with similar interests who will enjoy them i'm happy. Everybody i show mine to goes wow that's amazing how bored were you? okay i was off work sick for a few weeks and got REALLY bored, though now i continue to bother making them for the fun factor. I just don't have any use for any more than one at a time, and it seems silly to have them sit without the memory in them or not being used and enjoyed.

Monk wrote:

Tweaker wrote:

Monk wrote:Have 2 x 15 X 295 ( 12" ) X 50 series low profile BF Goodrich Radial TA's
These tyres were put on the Corvette & on the road 1 time & were too wide so had to be removed
They are perfect condition & are going cheap at $300.00 for both
will upload a photo later today.
contact me if your interested.

Hey Monk, I'm up for rego soon and I doubt mine ones will pass. You may have just saved me a nock back on rego. Any idea what these will cost to post to 2480. NSW, QLD border.

Will find out for you Tweaker & let you know. most likely have to be sent via courier cause they are big tyres & would be cheaper than Australia Post

Cool thanks Monk!

Have 2 x 15 X 295 ( 12" ) X 50 series low profile BF Goodrich Radial TA's
These tyres were put on the Corvette & on the road 1 time & were too wide so had to be removed
They look dusty cause they have been sitting around the shed
They are perfect condition & are going cheap at $300.00 for both
contact me if your interested & arrange your own transport as l dont have the time but will be there for a courier pickup

you should put those tyres on your merc.....

I was thinking the same thing!

Ow and by the way..... Doh!.............

Hello Vanners, my name is Andrew, a Junior Sundowner Vanner, and are currently making hand made Panel Van Clocks. I have already made 3 Panel Van Clocks and would like to sell them starting at $35 to $45 each, depending on size + Postage and Handling.
Sizing of the clocks are:
30cm X 20cm Seawitch clock $35
33.5cm X 23cm New Sandman clock $40
34cm X 27.5cm Green Sandman Clock $45

I am also taking orders for individual Panel Van Clocks, just email me your picture. You can have your clock laquered or not, Black or Gold Numbers or Roman Numerals, and Black or Gold movements. I have attached a picture of the clocks made so far.

[img][/img]
[img][/img][img][/img]

I will send you a pic of my van Andrew, they are cool

Hey Andrew, they look great! Will send pic of my van once i've got a good clean van shot. Also, you only do vans? i.e. what about a sedan of sorts or motorbike?
ta
Maz

Better get started on making quiet a few to sell at the Nats......

I will make any kind of clock, sedans and bikes, just send me your photos. I can make the clocks to be picked up at next years Van Nationals.


Andrew

I would looking at getting at least 5 Andrew, will send the pics to you, Great Job

I have HQ Unger headlight protectors new never used

Single or twin headlight Stu??

this is a wanted ad does anyone have a spare hq van fuel tank in good cond they dont want thanx wizard ps it is to replace the original not to put in a second tank mine has a hole in it around the 1/2 full area thanx again wizard

Hey Wizard, I had the same problem and got mine weldered. I don't know what services you have in your area but I live in a large Rural town. I took the tank into NORCO (North Coast Dairy Company) and they steam blastered the tank for a 24 hour period and gave me a certificate to say it was cleaned. Cost me $20. This certificate then enabled me to take the tank and get it sandblastered and then to a welding joint and have the cracks weldered up. It's in getting painted as I type this. This option might be available in your area. It's only really a couple of day turn around if you can paint it yourself, and I've seen the photos of your top painting abilities!

Best of luck!

Lovin your photos!

Anyone interested in XF Falcon parts?? I have a heap of XF stuff to sell or swap for Holden/Bedford stuff..Let me know if ur looking for anything in particular...Nigz

I am selling for a friend a gemini windowless panelvan (project) compleat running car, 4 speed manual will have more info tomorrow if there is interest. needs blue slip and tlc

I think it is a TD model .It has a front spoiler and will need att. to the drivers floorpan $1000

Any one doing up an old ambo? I can get hold of all different types of ambo stuff like lights, sirens, strechers body bags ect. if you are after any just pm me, thanks Dale.

I'm afraid to ask but how can you get hold of this stuff??

contacts.